Kathy Ireland PRO Series Owner's Manual page 10

3. Ceiling Fan Assembly
3.13
Position the Switch Housing Assembly on the Switch
Housing Plate and align the Holes in the Switch
Housing Assembly with the Holes in the Plate .
Secure the Switch Housing Assembly by reinstalling
the three Mounting Screws (previously removed)
(Figure 12) .
NOTE: Do not pinch wires between the switch
housing assembly and the switch housing plate.
You have now completed the assembly of your new
Ceiling Fan . You can now proceed with hanging and
wiring your Fan .
(Continued)
Figure 12
10
SWITCH
HOUSING
ASSEMBLY
MOUNTING
SCREWS (3)
U.L. Model No.: 52-ANT