Advertisement
Operating Instructions for LIS 101 Light Control System
Connection sequence
Dimensions
Weight
Housing
Operating voltage
Current
Standby current
(lighting off)
Operating temperature
Storage temperature
Humidity
4
Only buttons (closers) and no switches may be used for the connection.
Y
Buttons automatically return to their original state after being pressed.
Connect the dimmer in the following order (also refer to circuit diagram):
1. Disable 12V supply.
2. Directly connect the lighting to the LIS 101 dimmer with a 2-wire cable.
3. Connect one (or more) light switches as follows:
Connect one lead of the button to the Minus "--" or the "+12V" of the
F
12V supply
Connect the other lead of the button to the "Taster" connector on the
F
LIS 101 dimmer.
If available, connect any further buttons in the same way (parallel).
F
4. Connect the Plus "+" of the supply to "+12V" on the LIS 101 dimmer.
5. Connect the Minus "--" of the supply to "-- Minus" on the LIS 101 dimmer.
2.3
Technical details
2.3.1
Mechanical data
68 x 23 x 57 (W x H x D in mm)
40g
Black plastic
2.3.2
Electrical details
for 12V DC systems (10.5 to 15V)
max. 10 A
max. 5mA
2.3.3
Environmental parameters
-10 °C to +45 °C
-20 °C to +70 °C
Operation in dry environment only
CE
CE marked
Date: 28.02.2011
822.381 BAMA / EN
Advertisement
