Table of Contents
Advertisement
2) Seal the TYVEK Pouch using a heat
sealer. Ensure that the seal is
complete.
3) Put the sealed pouch into a tray
or plastic mesh wire for
sterilization.
4.8
Storage
Store the equipment in a cool, dustproof and dark space to avoid
high temperature, humidity and direct sunlight. Limitations for
the time for sterilized equipment belong to package.
5. Maintenance and Safety Inspection
5.1
Daily check
Visually check the surface of the probe head, housing and cable
for any crack, scratch or denaturalization. If you find damage,
do not use the probe and immediately contact a service support.
TYVEK
Pouch
Fig. 7
Tray for sterilization
Probe in the Pouch
Fig. 8
Packaging in a tray
-18-
Sealed
Sealing
Q1E-EP0348
Advertisement
Table of Contents
