Getting Started; Unpacking And Checking The Delivery; Steps For Initial Setup - Fujitsu ESPRIMO P5 Series Operating Manual

Getting started

Gettingstarted
Please observe the safety information in the

Unpacking and checking the delivery

It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later date.
Packaging, Contentsofdelivery Packaging
► Unpack all the individual parts.
► Check the contents of the package for any visible damage caused during transport.
► Check whether the delivery conforms to the details in the delivery note.
► Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.

Steps for initial setup

Preparingforuse, Preparingforfirstuse,overview
Only a few steps are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Connect external devices such as mouse, keyboard and monitor
• Check the voltage at the mains outlet and connect the device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards with your device, please do not install
them until after first-time setup. The installation of drives and modules is
described in the "System Upgrades and Repairs" manual.
Fujitsu
"Important notes", Page 11
Getting started
chapter.
13