Brother RJ-3150 Manual page 197

RJ-3150
Creating a label with GIMP (Linux®)
To create a label with GIMP, do the following:
1. Open a new file with the image size supported by the label.
2. Edit the image.
3. Open the print menu and set the following configuration for your printer.
"Image Settings" Tab -> "Adjust Page Size and Orientation"
The supported media length for continuous tape is about 100 mm.
Use the paper tool command to add a custom media size longer/shorter than 100 mm.
For more information, see
© 2001-2019 Brother Industries, Ltd. All Rights Reserved.
Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
"Adding a custom media size for continuous tape (Linux®)".
191 / 237
Go to Index
Go to Index