Brother RJ-3150 Manual page 105

RJ-3150
How to insert a new image into each label using a database file. (P-touch Editor 5.x for Windows)
Load the Access file to P-touch Editor and print the file as described below.
In this example, we will use a database defined in Access as follows:
The "Image" field is an "OLE object" data type, and a bitmap file (.bmp) is inserted.
1. Start P-touch Editor, set the printer and media size, and then click [File] - [Database] - [Connect].
2. On the [Open Database] screen, select [Connect Database File], click [Browse], and locate the folder where the above Access file is saved.
3. Select the Access file and click [Next]. The Access data appears.
The "Image" (OLE object) field does not appear in P-touch Editor, but the file is correctly connected.
4. Click [Insert] - [Database Field]. (If [Insert] does not appear in the menu bar, click the area where the tape is shown.)
5. Select "Image" for "Merge Type" and then select the desired image. The image of the "Image" field appears.
6. Click [Insert] - [Database Field]. On the [Merge Fields] screen, select "Model" and then click [OK]. The "Model" field appears.
99 / 237
Go to Index
Go to Index