Advertisement
Connecting the SSD to Your Device
1. Determine which cable is needed for the host device.
2. Plug the USB-C™ end of the cable into the USB-C™ port on the SSD (see Exhibit A).
3. Plug the other end of the cable to an available USB-C™ or USB-A (depending on the cable needed)
port on the host device (such as a laptop or desktop computer).
4. Game on!
Note: performance will vary depending on the user's system and environment. While the included cables are
compatible with USB 2.0, using lower interface ports will produce slower results. No software is required to
run the Verbatim VGX1000 Gaming PCIe NVMe External SSD.
Lighting
The Verbatim logo on your new SSD is RGB illuminated. The color will cycle through a pre-programmed
set of colors during data transmission to and from the SSD.
The blue LED indicator on the bottom of the drive will also blink during data transmission.
Exhibit A
USB-C™ Port
Advertisement
