Download
Share
Print this page
Ryonet Riley Hopkins 250 Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Ryonet Manuals
  4. Power Tool
  5. Riley Hopkins 250
  6. Assembly instructions manual

Ryonet Riley Hopkins 250 Assembly Instructions Manual

4-color, 1-station micro screen printing press
Hide thumbs

Advertisement

Quick Links

Download this manual
Assembly Instructions
4-Color, 1-Station Micro

Advertisement

loading
Need help?

Need help?

Do you have a question about the Riley Hopkins 250 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ryonet Riley Hopkins 250

Summary of Contents for Ryonet Riley Hopkins 250

  • Page 1 Assembly Instructions 4-Color, 1-Station Micro...

  • Page 3: Tools Required

    Tools Required: • Two 9/16” wrenches • One Phillipps screwdriver What’ s in the box Item Qty. Main Press Core Assembly 1 per unit Micro Print Head Assembly with Screen Clamp 4 per unit Mounting Feet 2 per unit 16” x 16” MDF Platens with Neck 1 per unit 1 per unit Hardware Kit...
  • Page 4 PRCO-RH250MTGHDW Riley 250 Mounting feet hardware Name/ID Description Qty. PRHD-HC3/8NC1GR5ZC 3/8-16 X 1 Hex Cap Screw PRHD-WA3/8USSPFC9ZY 3/8 PFC9 USS Flat Washer-Yellow PRHD-LNYN3/8NCGR5ZC 3/8-16 Lowpro Nyloc Zinc Mounting Hardware pack perforated bag (qty. 4 PRCO-JR41MTGHDWKIT screws)
  • Page 5 PRCO-RH250STOPHDW Riley 250 bump stop hardware Name/ID Description Qty. PRSA-SPRINGKIT Riley Hopkins Press Mesh Covered Spring PRCO-BMPRBLTCVRBLU Print Head Rubber Bump Stop PRHD-HC3/8NF3GR5ZC 3/8-24 x 3” Hex Cap Screw grade 5 Zinc PRHD-LNYN3/8NFGR5ZC 3/8-24 Lowpro nyloc nut PRHD-WA3/8SAE-SS 3/8 Flat washer PRCO-9/16ENDWRENCH 9/16”...
  • Page 6 PRCO-RH250HNGHDW Riley 250 print head hinge hardware kit Name/ID Description Qty. PRHD-HC3/8NF3GR5ZC 3/8-24 x 3” Hex Cap Screw grade 5 Zinc PRHD-WA3/8SAE-SS 3/8 Flat washer PRHD-LNYN3/8NFGR5ZC 3/8-24 Low pro Nyloc Nut...
  • Page 7 Step 1 Install the Mounting feet (4) to the main press core with the supplied hardware. Two 9/16” wrenches are required for this step. Note: Refer to Page 2 for hardware detail.
  • Page 8 Step 2 Install the Print head assemblies with the supplied hardware. Two 9/16” wrenches are required for this step. Repeat this step for the remaining print head assemblies. Note: Refer to Page 4 for hardware detail.
  • Page 9 Step 3 Install the spring assemblies with the hooks facing upward. Lower the Print head assemblies until they rest on the lower stop bolt. Repeat this step for the remaining print head assemblies. Note: Refer to Page 3 for hardware detail. Hooks must be facing upward Lower Stop...
  • Page 10 Step 4 Install the upper stop bolts and rubber sleeves. Two 9/16” wrenches are required for this step. DO NOT OVERTIGHTEN THE BOLTS. This will cause resistance in the print head hinge point. Repeat this step for the remaining print head assemblies. Note: Refer to Page 3 for hardware detail.
  • Page 11 Step 5 Mount the press base feet (2) to a sturdy tabletop with supplied mounting screws (1). Press is shown mounted on a Riley Hopkins 1-station press cart (sold separately). A Phillips screwdriver is required for this step. Note: Refer to Page 2 for hardware detail.
  • Page 12 Step 6 Install the platen assembly (1) onto the tubular arm of the press. When platen is in desired location, first lock down the side knob (2). Lastly, tighten down the lower locking knobs (3). The platen can be adjusted front-to-back to help position the image onto the desired location of the substrate.
  • Page 13 Step 7 Off-contact and tilt adjustments. First lock the screen in place with the screen clamping knobs (1). Next, loosen the off-contact nuts (2) with a 9/16” wrench. Set the desired off-contact position and retighten the nuts. Lastly, set the tilt angle of the screen by first loosening the tilt locking nuts (3) and the loosen the wing nut (4).
  • Page 14 PRTB-RH250-4X1 Riley Hopkins 250 4 color, 1 station screen printing press with micro Name/ID Description PLWD-WIN16X16N-LOW Riley 250 Platen Assembly With Bracket PRSA-RH250CLAMP Riley 250 Screen Clamp Assembly PRSA-RH250PNTHD Riley 250 Print Head Assembly PRSA-SPRINGKIT Riley Hopkins Press Mesh Covered Spring PRHD-HC3/8NC1-1/2NYBLK 3/8”-16 x 1-1/2 Nylon Bolt Black...
  • Page 15 PRSA-RH250PNTHD Riley Hopkins 250 Print Head Assembly with Micro Name/ID Description Qty. PRCO-KNBRCHT3/8NCFM 3/8 -16 Inch Course Ratchet Handles PRCO-BRNZB3/8ID1/2LG 3/8” x 1” Sintered Bronze Bushing MFPD-RH250SPGPLT RH250 Color Arm Spring Plate PRCO-RDED5/16RHML 5/16”-24 Right Hand Male Rod End PRHD-SCRWCVR5/16 5/16”...
  • Page 16 While we take pride in our quality and do our best to ensure your satisfaction, Riley Hopkins™/Ryonet ® does not assume any liability for damages, whether consequential or incidental, that may result from the misuse of below stated specifications. LIMITED WARRANTY GENERAL PROVISIONS: The warranties described below apply ONLY to the original purchasers of new Riley Hopkins™...
  • Page 18 NOTES: NOTE: Logos, graphic elements and or photo images contained in this document may not be reproduced without the written consent of Ryonet...

This manual is also suitable for:

Prco-rh250mtghdw