Advertisement
step 1
5.4.
5.4.1.
lay the whole package on the ground with the table
top (1) facing down.
5.4.2.
lift both H leg frames (2) upright as per diagram above
and insert the leg frames (2) into the slots on each side
of the table top (1).
5.4.3.
Fix both H leg frames (2) to the table top (1) using the
pan head bolts (4) and hex nuts (5) provided.
step 2
5.5.
5.5.1.
Invert the workbench so that it is upright.
5.5.2.
Attach the horizontal back brace (3) and
fix it to the leg frames (2) using the pan head
bolts (4) and hex nuts (4) provided.
5.6.
step 3
5.6.1.
Assembly now complete.
enVironment protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, kempson way, suffolk business park, bury st edmunds, suffolk. ip32 7Ar
01284 757500
© Jack Sealey limited
step 1
step 2
step 3
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
AP0618.V3| Issue:1 27/04/18
Advertisement
