Table of Contents
Advertisement
Available languages
Available languages
NOTE: If using the Snorkel Vault and Centipede Modules, small cobbles will need to be backfilled around the excess
excavated perimeter of the filter in order to provide a sufficient base for the AquaBlox
STEP 8
INSTALL AQUABLOX
®
Install AquaBlox
in the storage basin, butting them tightly against each other. After placement of the tanks, bring the inner
®
geotextile (if using) up the sides of the tanks. For the Rainwater Harvesting Water Storage Kits please refer to the Rainwater
Harvesting Water Storage Kits diagram that is being installed for the proper tank configuration.
NOTE: When stacking AquaBlox
instructions for more detail.
☎
aquascapeinc.com |
CAN (866) 766-3426 |
Snorkel
Vault and Centipede
®
®
only one panel "A" is required between the two joined AquaBlox
®
☎
US (866) 877-6637
to sit on.
®
. See tank assembly
®
7
Advertisement
Chapters
Table of Contents
