Tank Installation - AquaScape AQUABLOX 29491 Instructions & Maintenance

NOTE: Be sure to check all pieces upon arrival for any damages that may have occured during shipping.
SMALL AQUABLOX
®
The Small AquaBlox is recommended in use with
®
Pondless Waterfalls using the Pondless
®
and also when constructing a wetland filter using the Large
Snorkel Vault and Centipede
®
Side
Small AquaBlox
®

Tank Installation

STEP 1
EXCAVATE STORAGE BASIN
It is recommended to lay out the position of the Pondless
determine actual excavation dimensions.
NOTE: An additional 6" of excavation is recommended per side of the basin to allow for AquaBlox
backfill material, and compaction required during backfilling.
See the diagrams below for examples of Pondless
constructed by increasing the quantity of Small AquaBlox
with the Large AquaBlox
NOTE: Check for presence of high water table in the excavation, which must be kept at levels a minimum of 3 feet below
the bottom of the AquaBlox
4
Waterfall Vault
®
Module.
®
Load Bearing Top
26.5"
16"
9.5"
®
. Liner and geotextile dimensions will vary according to the quantity and size of AquaBlox
®
structure at all times.
®
LARGE AQUABLOX
The Large AquaBlox
Pondless Waterfalls and Rainwater Harvesting System
®
using the Large Snorkel
Centipede Module.
®
Side
Load Bearing
Bottom
Waterfall Vault and AquaBlox
®
Waterfall storage basin configurations. Larger storage basins can be
and/or using the optional Snorkel Vault Extension in combination
®
☎
US (866) 877-6637 |
®
is recommended in use with
®
Vault and Half- or Large
®
26.5"
16"
17.5"
Large AquaBlox
prior to excavation in order to
®
dimensions, sufficient
®
☎
CAN (866) 766-3426 | aquascapeinc.com
Side
®
used.
®