AquaScape AQUABLOX 29491 Instructions & Maintenance page 6

STEP 4
INSTALL OUTER NON-WOVEN GEOTEXTILE UNDERLAYMENT
Lay the geotextile into the excavation covering the bottom and sides.
Multiple sections of geotextile can be overlapped to accomplish complete
coverage.
STEP 5
INSTALL 45 MIL EPDM LINER
Lay the liner into the excavation and position to cover entire storage basin.
Do not trim the excess liner material until later in the project.
STEP 6
INSTALL OPTIONAL INNER NON-WOVEN GEOTEXTILE
UNDERLAYMENT
It is recommended using a second layer of geotextile within the lined
storage basin to wrap around the bottom and sides of the AquaBlox
This is a precautionary step that helps protect the liner.
NOTE: All Rainwater Harvesting Water Storage Kits include enough
geotextile for both the inner and outer geotextile installation. Lay the
geotextile into the lined basin before installing the AquaBlox
geotextile does not need to be wrapped over the top of the AquaBlox
just the bottom and sides.
STEP 7
INSTALL PONDLESS
AND CENTIPEDE MODULE
®
Place the filter(s) into their proper location.
6
WATERFALL VAULT OR SNORKEL
®
.
®
. The
®
,
®
VAULT
®
☎ ☎
US (866) 877-6637 |
Pondless
CAN (866) 766-3426 | aquascapeinc.com
Waterfall Vault
®