Scope Of Delivery; Design Of The Spray Gun; Intended Use - SATA SATAjet 5000 B RP Operating Instructions Manual

Operating instructions SATAjet 5000 B RP/HVLP
Weight
additional weight of swivel joint
version
Compressed air connection
3.

Scope of Delivery

• Spray gun with nozzle set and
RPS cup
• Operating Instructions
• Tool kit
• CCS clips
4.

Design of the Spray Gun [1]

[1-1] Spray gun handle
[1-2] Trigger
[1-3] Nozzle set consisting of air
cap, fluid tip (not visible),
paint needle (not visible)
[1-4] Spray gun connection with
QCC
[1-5] Gravity flow cup connection
with QCC
[1-6] Paint strainer (not visible)
[1-7] Gravity flow cup
[1-8] Gravity flow cup lid
5.

Intended Use

The spray gun has been designed for the application of paints, lacquers
and other sprayable media by means of compressed air on suitable sub-
strates and surfaces.
11 g
1/4" male thread
Alternative versions with:
• Swivel joint
[1-9] Anti-drip device
[1-10] Round/flat fan control
[1-11] Material flow control screw
[1-12] Material flow control counter
nut
[1-13] Air micrometer (aif flow con-
trol knob)
[1-14] Air micrometer (air flow con-
trol) locking screw
[1-15] Air piston (not visible)
[1-16] Compressed air connection
[1-17] ColorCode-System (CCS)
0.4 oz.
EN
101