Safety Precautions - Carbest 47408 Manual

INFLATOR HOSE:
Operation instructions:
The air compressor comes with a heavy, heat-resistant main hose with quick-connection stud.
TIRE INFLATION
1. Attach the quick-connect coupler to the air compressor.
2. Fix the tire chuck onto the tire valve stem.
3. Switch the air compressor on to begin inflation. When the desired pressure is reached, turn off the air
compressor.

SAFETY PRECAUTIONS:

1. Always inflate tires to manufacturer's recommended tire pressure. Exercise extreme caution when driving
with aired tires. Re-inflate tires before high-speed roadway travel.
2. Never exceed 20 mph when driving with partially inflated tires.
3. Never make sharp turns while driving with reduced tire pressure.
4. Re-inflate tires before high-speed travelling on roadways.
5. Use a heat-resistant extension hose with a minimum rated working pressure of 200 PSI. Do not use after-
market hoses with less than 200 PSI working pressure. Some aftermarket hoses may not be suitable for
use with the air compressor due to heat and pressure typically generated by this type of air compressor.
6. Use of close-ended tire chuck will cause excessive pressure build-up if tire chuck is not attached to tire
valve stem while the air compressor is in operation. Always use an open-ended tire chuck such as the tire
chuck equipped on the deflator coil hose for tire inflation.
CAUTION: Never touch the air compressor or fittings connected to the air compressor other than the On/
Off switch with bare hands during or immediately after usage. Main hose and fittings on extension hose will
become very HOT during and after use. If necessary, wear heat-resistant gloves to remove extension hose
from main hose.