Releasing Your Active5 P - F-One M5 Manual

Triggering the ACTIVE 5
The PUSH SYSTEM
To cancel completely the power of the kite and to make it land on its back down your wind
safely, simply push the bar away from you in order to active the system then let go of the bar. You
then remain connected by the depower line and the 5
This system of release by pushing of the bar is totally instinctive and instantaneous. Be-
neath the system we have place a PU disk working as a shock absorber to prevent from u n-
wanted releases.
The PULL SYSTEM
For the more experienced riders, we also offer a manual release; the "Pull System". Pulling
on a plastic ball activates it. You can easily install this system: release the pin, unscrew the shack-
les and install the 'Pull System".
PULL
WARNING
th
If the 5 line gets wrapped around the
kite, unhooked it from the T -one (see
picture).
Ride back to shore with the 4 -line set
up and reconnect the 5
15 15
PUSH
th
line.
www.f-onekites.com
th
line. (see picture)