Miele KF 2802 Vi Operating And Installation Instructions page 44

Installation
 Place the washers and nuts  back
in position and tighten the nuts .
The cabinet front is now secured.
 Now tighten the screws in the angle
trims .
 Open the appliance door.
 Remove the spacers  from the cab-
inet front.
44
The position of the lower cabinet front
aligns with the position of the upper
cabinet front:
1/8" (3 mm)
 Measure the gap Z between the
mounting frame for the lower appli-
ance door and the lower edge of the
cabinet front above it.
 Maintain a gap of 1/8" (3 mm) to the
upper cabinet front.
To install the cabinet front to the lower
appliance door, repeat the steps start-
ing from "Preparing to install the cabi-
net front".