Miele KF 2802 Vi Operating And Installation Instructions page 78

Selecting additional settings
Deactivating Miele@home
 In Settings mode , use the  and
 sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the  and  sensor controls to
select
Deactivate
confirm your selection.
Deactivation successful
display.
 Confirm the message with OK.
Your refrigeration appliance is now dis-
connected from your WLAN network.
The  symbol will go out on the dis-
play.
Activating Miele@home
If you have already activated
Miele@home and then disconnected
the connection, you will need to reac-
tivate the connection.
 In Settings mode , use the  and
 sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the  and  sensor controls to
select Activate
firm your selection.
Activation successful
display.
 Confirm the message with OK.
If the WLAN connection is active,  will
appear on the display.
78
and select OK to
will appear on the
and select OK to con-
will appear on the
Checking the WLAN connection sta-
tus
 In Settings mode , use the  and
 sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the  and  sensor controls to
select Connection status
to confirm your selection.
Information about the WLAN connec-
tion status will then appear on the dis-
play:
-  connected: there is a strong con-
nection
-  connected: there is an average
connection
-  connected: there is a weak con-
nection
-  disconnected
Setting up Miele@home again
If you have changed your WiFi network,
you can set up Miele@home again for
your appliance.
 In Settings mode , use the  and
 sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the  and  sensor controls to
select Set up again
confirm your selection.
Reset configuration?
display.
 Use the  and  sensor controls to
select or
Yes No
confirm your selection.
and select OK
and select OK to
will appear on the
and select OK to