Table of Contents
Advertisement
2.3 About of auxiliary supply
By applying auxiliary power to the power supply (AUX. SUPPLY) terminal of mounting base, power is supplied
to each unit.
When mounting base has unit individual power switch.
Please insert this product into the mounting base and tighten the screw to fix the main body.
An auxiliary power is supplied. Also, when removing, by loosening the screw, supply of auxiliary power
supply is cut off. (When the auxiliary power is supplied, the power LED of this product lights on, and it
lights off when it is shut off.)
Without individual unit power supply switch.
Regardless of the tightening of the fixing screw on the main unit, auxiliary power is supplied.
Tighten the fixing screw to supply auxiliary
power supply. (Power LED lights on)
If the unit has an individual power switch, auxiliary power will not be supplied to this product
unless the fixing screws are securely tightened. Be sure to tighten the fixing screw.
2.4 Cautions on installation
● Wiring state
Please separate wiring of input and output and perform consideration to noise. And, please separate
from a line with the power line used as the source of a noise and steep voltage, and current as much
as possible. Please use shielding wire for the bottom of the remarkable environment of a noise.
● Environmental condition
(1) Ambient temperature and humidity range
The ambient temperature and humidity during the operation of each equipment should be in the
following range.
Temperature: -10 to 55 ℃, humidity: 5 to 90％ RH (Non condensing)
(2) Ambient atmosphere
Please be careful when using in dusty environments.
Also, please consult us when using under corrosive gas [hydrogen sulfide (H
environment.
2.5 LCD viewing angle
Mount the LCD to obtain an optimum angle,
since the contrast changes according to
the monitoring angle.
POWER LED
(LED lights on)
Fixing screw
Front view
Front
30゜
15゜
Loosening the fixing screw will shut off the
auxiliary power supply. (Power LED lights off)
Side view
Top
Under
6
FSDLC-220-047
POWER LED
(LED lights off)
Fixing screw
Front view
S), chlorine (Cl), etc.]
2
Top view
Back
Mounting base
FSDLC
Front
45゜ 45゜
Back
Advertisement
Table of Contents
