Configuration Software; Create A Configuration Card - Nedap LEGIC Booster Installation Manual

LEGIC Boosters | installation guide

3.3 Configuration software

NEDAP has developed a software application that allows system integrators to create configuration cards. This
software can be downloaded from our partner portal website https://portal.nedapidentification.com.
A LEGIC Advant programmer based upon LEGIC SC-2560 or SM-4500 chipset is required.
For example: KABA B-Net 9107 or KABA B-Net 9108.
Figure 3: LEGIC Booster configuration software

3.3.1 Create a configuration card

The configuration card contains the information which user cards are supported and which data on these cards must be
read. Follow the procedure below to create a configuration card.
1. Specify the OPTIONS
2. Specify the SEARCH DEFINITIONS
3. Specify the DATA DEFINITIONS
4. Load the Master Token IAM.
Place the master token IAM card on the programmer and click 'Authorization', 'Add'.
The message 'Authorization accepted' should appear.
5. Write the configuration into a transponder.
Place the configuration card on the programmer and click 'Configuration', 'Write TXP'.
The message 'Configuration data written' should appear.
The configuration can be saved in a bcf-file.
8/18