8.5
Start screen
The gure shows the welcome screen of the redundancy box with the respective program version
SW: V1.1. The welcome screen will remain for 5 seconds with the orange backlight and then jumps
directly to the start screen.
8.6
Main image
At the main image you haves an overview of the system and at the same time all the relevant information
of the two indoor units, ie status and equipment mode. This page is without control panels.
RUN
OFF
OFF:
Unit is switched o
RUN:
Unit in operation
STATUS OK:
Unit has no errors
STATUS FAULT:
Unit has an error (light blinks red)
16 I
TOSHIBA
Version
OK
FAULT