Product Overview; Intended Uses; Break In Period - Gehl Z27 Operator's Manual

Table of Contents

Advertisement

3. Product Overview

3-1. Intended uses

Model Z27/Z35 Excavators are intended to perform the following tasks:
• Digging
• Leveling of ground
• Shoveling
• Ditching and Guttering
• Loading
For the details of how to work with the machine, refer to OPERATION Section "13-13. Operations using
the bucket".

3-2. Break in period

The machine should not be subjected to severe stresses and loads during the initial break in period al-
though it has been prepared well and stringently inspected before shipping. Otherwise the machine's
performance may be affected and its service life shortened. Thus it is essential to break in the machine
for the first approx. 100 service hours (reading of the hour meter).
In breaking in the machine:
• You should warm up the engine by idling for 5 minutes before starting operations.
• You should not operate the machine under heavy loads or at high speed.
• You should not start and accelerate the engine too abruptly, or stop it too abruptly.
• You should not change travel direction too abruptly.
The safety instructions for operation and maintenance that are presented in this Manual are applicable
to each of the intended tasks. Never misuse this machine by violating the applicable safety instructions
or by attempting to perform unintended tasks, because of the danger of serious bodily injury.
The machine should not be used for unintended tasks
0-3

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading
Need help?

Need help?

Do you have a question about the Z27 and is the answer not in the manual?

This manual is also suitable for:

Z35

Table of Contents