Gehl Z27 Operator's Manual page 3

1. Introduction
This Operation and Maintenance Manual for the model Z27/Z35 Excavators is designed to provide you
with important information and suggestions necessary for using the machine with safety and efficiency.
Please be sure to read through the manual before using the machine, to make yourself familiar with the
procedures and instructions for operating, inspecting and servicing. Keep in mind that failure to observe
the precautions given in the manual or using any procedures not prescribed in the manual may cause a
serious accident.
Improper use of the machine may lead to hazards which can result in death or serious injury.
Personnel engaged in operating and maintaining the machine are required to familiarize
themselves with the contents of the manual before setting about their job.
• Do not attempt to operate the machine before making yourself familiar with the contents of
the manual.
• Personnel responsible for using the machine must keep the manual at hand and review it
periodically.
• If the manual should be lost or damaged, promptly order a new copy from the dealer.
• When you transfer the machine to another user, always transfer the manual as well.
• We at Manitou Americas provide customers with products in compliance with all applicable
your country's regulations and industrial standards. If you are using a machine purchased
abroad, the machine may lack some safety devices. Please consult your dealer to confirm
whether or not that machine is in compliance with all applicable your country's regulations
and industrial standards.
• Some machine specifications may differ from those which are described in this manual be-
cause of improvements in its design and performance. If you have any questions about the
contents of the manual, don't hesitate to contact your dealer.
• Important safety instructions have been presented throughout this manual, and have been
summarized in PART ONE : SAFETY. Be sure to review these pages and pay heed to those
safety instructions before proceeding to operate the machine.
0-1