JVC LT-43HW95U Operating Instructions Manual page 23

Menu Operation
■ DTV Manual Tuning: Manual store for digital channels.
Frequency, Symbol and Modulation values are needed in
order to add a programme correctly in DVB cable mode.
Please inquire of the cable service provider about the
correct values. When setting is completed, select Search
and press the OK button to start channel tuning.
※ When TV signals is Satellite.
■ Auto Tuning: Press the OK button to enter sub-menu.
– Country: Press the ▲/▼ button to select country.
– Search: Press the OK button to enter search settings.
• Satellite: Press the ▲/▼ button to select the satellite.
• Transponder: Press the ▲/▼ button to select the transponder.
• Scan Mode: Press the ▲/▼ button to select the scan mode.
• Service Type: Select the service type to search.
• Scan Type: Press the ▲/▼ button to select FAST SCAN or BLIND SCAN.
• Search: When you are satisfied with your setting, press the OK/► button. The
TV will begin memorizing all of the available channels.
■ Satellite Settings
– Satellite/Transponder: Press the ▲/▼ button to select
the Satellite/Transponder and press the OK/► button.
Press the ▲/▼ button to select the satellite/transponder
from the list.
– LNB Power: Select the power supply type for the LNB.
– LNB Type: Select the LNB type.
Press the OK button access the submenu. Items can be
adjusted when the LNB Type is set to Universal Mode.
– 22kHz Tone: 22KHz SWITCH. Select the 22KHz
depending on the LNB type.
– Toneburst: You can choose one of two satellites. Used
to choose proper device.
– DiSEqC1.0: You can choose one of four satellites. Used to choose proper device.
– DiSEqC1.1: You can choose one of sixteen satellites. Used to choose proper
device.
– Motor: Sets the positioned type between DiSEqC1.2 and DiSEqC1.3.
When motor is set to DiSEqC1.2 or DiSEqC1.3:
Set position: Press the red button to set position.
Move Auto: Rotates the antenna automatically.
Move Continue: Rotates the antenna until the rotation has been completed or
stopped manually.
Move Step: Rotates the antenna in accordance with the step value. Enables the
antenna make a finer adjustment.
Store Position: Store current position as the selected positioner limit.
Goto Position: Rotates the antenna to the stored satellite position.
Goto Reference: Drive antenna to zero position.
21
DTV Manual Tuning
Search
Frequency
394000 KHz
Symbol
Auto
Modulation
Auto
DTV
Radio
Data
Bad Normal Good
Quality
Strength
Adjust
Back
Satellite Settings
Satellite
ASTRA 1H 1KR 1L 1M
Transponder
10729 V 22000
LNB Power
13/18V
LNB Type
Universal
22kHz Tone Auto
Toneburst
None
DiSEqC1.0
None
DiSEqC1.1
None
Motor None
Single Cable None
Bad Normal Good
Quality
Strength
0
0
0
Move