Operation; Getting Started; How To Calibrate - Fillmaster Systems Fillmaster PRO User Manual

Table of Contents

Advertisement

Fillmaster Pro™ | User Guide

Operation

Getting
Started
How to
Calibrate
Getting started with
your Fillmaster Pro™
1.
Flush filters before first use. For Reverse Osmosis systems:
Flush the first tank of water. See install guide for complete
instructions.
2.
Install SD card before powering on device. Secure SD card
in the slot. Slot is located under the top cover towards the
back (machine will come with SD partially inserted but only
operates if SD card pushed in completely).
3.
Plug in machine for power, turn on/off switch to "ON"
position. Both located under the top cover.
4.
Be sure that the water supply is turned on at all valves.
5.
Attach the dispensing tip.
6.
Purge the dispenser. To begin purge, press "Menu" on the
touch screen, then select "Dispense Water" which allows
you to enter 100mL. Collect water and repeat until water
runs clear. Repeating is common.
7.
Calibrate the unit. See instructions on how to calibrate the
unit.
1.
Press "Menu" on the touch screen.
2.
Select "Calibration."
3.
Place a graduated cylinder under dispensing tip and follow
directions shown on screen.
Fillmaster® Systems, LLC
9475 Gerwig Lane, Columbia, MD 21046
1-800-884-5771 • www.fii l lmastersystems.com
6

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Fillmaster PRO and is the answer not in the manual?

Questions and answers

Table of Contents