MCi Designplan GROUND LINER ETL Installation Instructions Manual page 6

Table of Contents

Advertisement

GROUND LINER®ETL
INDICATIONS
Never use the product as concrete expansion joint.
Must be taken into consideration the concrete expansions.
Leave separation of 1 mm as minimum between two luminaires every two meters of installed product.
Do not take out the foam joint stuck to the box, it is needed to absorb possible material expansions.
For concrete installation, shoETLd be used a covering over the concrete in order to improve the pro-
tection against external chemical agents.
Leave the 20 cm of drainage is under installer's responsibility. Not leaving it, may cause the damage of
the luminaire and consequent loss of warranty.
READ BEFORE INSTALLING THE
PRODUCT!

Advertisement

Table of Contents
loading

Table of Contents