Related Manuals for MCi Designplan GROUND LINER ETL
Summary of Contents for MCi Designplan GROUND LINER ETL
- Page 1 GROUND LINER ® Installation Instrucions Designplan Lighting, Inc., 79 Trenton Ave., Frenchtown NJ, 08825. T.908-996-7710 F.908-996-7042...
- Page 2 INDEX REFERENCES TECHNICAL DATA MEASURES INDICATIONS INSTALLATION EXTRACTION TOOL RGB CONNECTIONS MONOCOLOR CONNECTIONS SAFETY PRECAUTIONS...
-
Page 3: Product Codes
GROUND LINER®ETL PRODUCT CODES Options The standard version in RGB model is delivered with DMX. Also available with DALI control. Ground Liner® 1000 x 33 mm. Opal white 7101121/C02 Ground Liner® 1000 x 33 mm. Opal warm white 7101121/C22 Ground Liner® 1000 x 33 mm. Opal blue 7101121/C09 Ground Liner®... -
Page 4: Technical Data
GROUND LINER®ETL TECHNICAL DATA MECHANICAL SPECIFICATIONS Version 250 mm. 500 mm. 1000 mm. *Measures 130 x 75 x 250 mm. 130 x 75 x 500 mm. 130 x 75 x 1000 mm. 0,51 kg. 1,02 kg. 2,03 kg. Luminaire Weight 0,68 kg. - Page 5 GROUND LINER®ETL DIMENSIONS Inner Body 30 mm. 1000 / 500 / 250 mm. (1,18 in) (39,4 / 19,7 / 9,85 in) 30 mm. 1000 / 500 / 250 mm. (1,18 in) (39,4 / 19,7 / 9,85 in) Outer Body 35 mm. 1000 / 500 / 250 mm.
- Page 6 GROUND LINER®ETL INDICATIONS READ BEFORE INSTALLING THE PRODUCT! Never use the product as concrete expansion joint. Must be taken into consideration the concrete expansions. Leave separation of 1 mm as minimum between two luminaires every two meters of installed product. Do not take out the foam joint stuck to the box, it is needed to absorb possible material expansions.
-
Page 7: Installation
GROUND LINER®ETL INSTALLATION Place it to avoid entrance of dirt NOT INCLUDED... - Page 8 GROUND LINER®ETL INSTALLATION...
- Page 9 GROUND LINER®ETL INSTALLATION Pour the concrete carefully around the luminaires Remove cover...
- Page 10 GROUND LINER®ETL INSTALLATION Concrete detail MINIMUM DRAINAGE FILL UP WITH CONCRETE UP TO 5mm OVER THE BOX LEVEL Luminaire position Luminaire place GLETL.IMT-152.V1.
- Page 11 GROUND LINER®ETL INSTALLATION Once the luminaire has been placed, the lateral sides must be sealed with BOSTIK POLIURETANE for OUTDOOR applications...
- Page 12 GROUND LINER®ETL INSTALLATION GLETL.IMT-152.V1.
-
Page 13: Extraction Tool
GROUND LINER®ETL EXTRACTION TOOL Centric extraction End extraction... - Page 14 GROUND LINER®ETL CONNECTIONS This connection to be made inside outer body M030360 M030360 This connection to be This connection to be made inside outer body made inside outer body NOTE: All wiring outside of outer bodies Remote power supply must be run thru conduit! to be connected to fixtures inside a nema style (or equal) M030360...
- Page 15 GROUND LINER®ETL MONOCOLOR CONNECTIONS This connection to be made inside outer body M030360 M030360 This connection to be made inside outer body This connection to be made inside outer body M030360 NOTE: All wiring outside of outer bodies must be run thru conduit! POWER + CONTROL MONOCOLOR NO DIMMABLE DIMMABLE MONOCOLOR...
- Page 16 GROUND LINER®ETL MONOCOLOR CONNECTIONS Lineardrive 720D DMX/DALI/0-10V 24V DC max. 5 uds. x1m max. 5 uds. x1m M050206 Power Supply 24 V DC 320 W Group 1 GND 1 Group 2 Dali IN Dali IN GND 2 Dali OUT Next line Group 3 Dali OUT DMX +...
-
Page 17: Safety Precautions
GROUND LINER®ETL SAFETY PRECAUTIONS Use as directed This product serves exclusively lighting purposes and may: • Expose to strong mechanical loads or strong contamination. • Only be installed and operated after a condition inspection if the product is dirty or has been moistened through storage. - Page 18 Ground Liner®ETL IMT-152 v.01 Designplan Lighting, Inc., 79 Trenton Ave., Frenchtown NJ, 08825. T.908-996-7710 F.908-996-7042...