Care And Maintenance - Electrolux ERW0273AOA User Manual

38 www.electrolux.com
Installing the upper bracket
CARE AND MAINTENANCE
CAUTION!
Unplug the appliance before carry-
ing out any maintenance opera-
tion.
This appliance contains hy-
drocarbons in its cooling unit;
maintenance and recharging must
therefore only be carried out by
authorized technicians.
Periodic cleaning
The equipment has to be cleaned regu-
larly:
Do not pull, move or damage any
pipes and/or cables inside the
cabinet.
Never use detergents, abra-
sivepowders, highly perfumed
cleaning products or wax polishes
to clean the interior as this will
damage the surface and leave a
strong odour.
• Wash the inside surfaces with a warm
water and baking soda solution. The
solution should be about 2 table-
spoons of baking soda to a quart of
water.
ERW0273AOA_Wine_cellar_ELUX_CZ_DA_EN_FI_FR_IT_NO_PL_RU_SK_SV_UK.indd 38
Use two screws to install the upper
bracket on the top of wine cooler, then
push wine cooler into cabinet and use
two screws to fix the upper bracket on
the cabinet. Below drawing for reference.
• Wring excess water out of the sponge
or cloth when cleaning area of the
controls, or any electrical parts.
• Wash the outside cooler with warm
water and mild liquid detergent.
• Regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
• Rinse and dry thoroughly.
Take care of not to damage the
cooling system.
After cleaning, reconnect the equipmen
to the mains supply.
Changing the light bulb
WARNING!
Warning! If the LED lamp is faulty, DO
NOT CHANGE IT YOURSELF.
If the LED lamp is changed by a person
who is not qualified to do so, there is a
risk of injury and there could be serious
malfunctions.
The LED lamp must be replaced by an
expert in order to prevent any damage.
Speak Your local Service Force Centre.
2017-03-21 10:07:24