Download Print this page

Sealey PFC301 Manual page 3

Premier engine crane 3tonne - fixed

Advertisement

5. MAINTENANCE
Important: Both the maintenance and repair of this crane may only be carried out by qualified and authorized personnel, who are
familiar with the hydraulic systems used.
5.1.
Clean and lubricate the axes of the moving parts of the crane (5) at regular intervals. The crane should be kept clean and
protected from aggressive conditions at all times.
5.2.
Only original spare parts should be used.
5.3.
Withdraw the crane from service if it is suspected that it has been subjected to abnormal loads or has suffered any type of knock
until the problem has been resolved.
5.4.
If the oil level needs to be checked or refilled, dismantle the hydraulic unit and with the piston fully retracted, remove the filler plug
and drain its contents into a container. With the hydraulic in a horizontal position, proceed to introduce the necessary volume for each
model as indicated in these instructions. Avoid the entrance of any dirt with the new oil. Important: An excess of oil over the volume
required may affect the operation of the crane.
5.5.
Only use hydraulic oil, DO NOT use brake fluid.
5.6.
When the crane is not in use, it should be fully retracted in the lowest position so as to minimize piston corrosion (4). It is
recommended to apply an anti-corrosion product to the main piston and to the pump.
5.7.
Store the crane in a dry, clean place, out of the reach of children.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
PFC301 Issue: 2(F) - 31/10/18

Advertisement

loading