Using Your Blender - Hamilton Beach 53602 Manual

Using Your Blender

6
1. Make sure blender is
unplugged. Place blender
base on clean, dry surface.
Place cutting blade assembly,
blade side up, through
opening in blending jar
before twisting collar
onto bottom of jar. Add
Ingredients.
4. Plug into outlet. Press ON(I)/
OFF( ) switch to turn on
power to blender. The control
panel will flash and CANCEL
button will continue to flash,
indicating blender is ready for
blending. Press ON(I)/OFF( )
switch to OFF ( ) position
anytime machine is left
unattended.
IMPORTANT: The blender jar and cutting blade assembly are subject
to wear during normal use. Always inspect jar for nicks, chips, or
cracks. Always inspect cutting blade assembly for broken, cracked, or
loose blades. If jar or cutting blade assembly is damaged, do not use.
Call toll-free customer service number to obtain replacement parts.
2. Place lid on jar. Place blender
jar on base.
PROGRAM SETTINGS: Programs are optimized for recipe categories
and vary in blending speed and duration. The blender automatically
stops at the end of the program. Some recipes may require more or
less blending time.
SMOOTHIE – Blends frozen or fresh smoothies.
ICE CRUSH – Breaks ice into pieces small enough for slushies or fine
cocktails, using 1 to 1 1/2 cups (237 to 355 ml) ice cubes.
CLEAN – Add 5 cups (1.2 L) warm water and two drops dish
detergent to blender jar before starting the program for easy cleaning.
Rinse and dry.
3. Close quiet shield.