Display And Features - Amana RCS10MPA Owner's Manual

Display and Features (some models)
If These Features
are Different from
Yours
These features are intended to show the
variety that is available in the product
line. If your microwave does not have all
the options that are shown, it is not a
mistake. The information provided
applies to several of the models in the
product line.
START Pad
The START pad is used to
begin a manual time entry
cooking cycle. It is also used to save
any changes to programming
sequences or user options.
STOP/RESET pad
The STOP/RESET pad stops
a cooking sequence in
progress, clears out any remaining
time, and also ends a programming
or user option cycle. When the
STOP/RESET pad is used to end a
programming or option change, the
changes are discarded.
This feature enables each numbered pad to be programmed for a specific
cooking procedure/use. To use this feature, simply program the pad to the
desired length of time and power level. To use this feature, press the pad once
and the microwave will begin cooking.
This feature enables 100 programmed entries to be made. Each entry will be
assigned a double digit number, for example 07 as shown. When using the
double pad programming, two pads must be pressed to start the cooking
cycle.
Manual Time Entry
In addition to programmable pads, this microwave also accepts
specific time entry by using the TIME ENTRY pad. Using manual time entry
does not affect the programmed buttons.
QTY 2X Pad
The QTY 2X pad increases a preset cooking time by a percentage of the original
cooking time (cooking factor). The user may specify the percentage and it can
be changed for individual cooking sequences. This feature is very useful for
cooking multiple servings of foods. The QTY 2X pad can be used with either
single or double pad programming. To change the cooking factor, see
Programming the Oven Control.
P:--
Stage Cooking
Stage cooking is a cooking sequence with specific power stage
changes. The user can program up to four different power level changes and
the specific amount of cooking time at each power level. Each power level/
cooking time combination is known as a stage. Up to four stages can be
programmed. Stage cooking is available only in some electronic control models.
OP:--
such as beep volume, maximum cooking time, and the number of
programmable pads can be changed. To change different options, see User
Options in this manual.
8
9
0
Single Pad Programming
(example of pad 7 shown)
Double Pad Programming
(some models)
User Options
This microwave can be set for specific user preferences. Options
6