Oven Control - Amana RCS10MPA Owner's Manual

Cooking Display
DISPLAYS
READY
15:00
HOLD 0%
DEFROST 20%
MEDIUM 50%
MED-HI 70%
COOK
Programming Display
DISPLAYS
Program
OP --
dbl
STAGE
COOKING
CLEAN FILTR
(some models)
Oven Door Window
and Interior Light
Display and Features (some models)
DESCRIPTION
READY displays when oven control will accept entries.
Displays cooking time. If stage cooking is
programmed, total cooking time is displayed.
These settings display the current microwave power
level used. If no display is shown, microwave is
running at full power (100%).
COOK is displayed while the oven is generating
microwave energy during a cooking cycle.
DESCRIPTION
Displays when oven is in programming mode.
Displays when oven is in user option mode. User
options can then be set or specified.
Displays when the QTY 2X pad is pressed.
When programming a specific cooking stage. The
oven beeps twice at the change of each stage (1
through 4).
This oven displays CLEAN FILTR every 7 days. When
the message displays, clean the air filter
thoroughly. Cleaning the air filter will not shut
off the message. The message will stop
displaying automatically after 24 hours.

Oven Control

Filter
Display
Some items in the display can be seen but
are not available depending on model.
Ready
Ready displays when an oven control
will accept entries.
Cooking Displays
33:33 displays total cooking time. When
more than one cooking stage is
programmed, total time for all stages
displays. COOK displays when oven is
operating. DEFROST 20%, MEDIUM
50%, or MED-HI 70% will display to
indicate microwave power level being
used. HOLD 0% does not display
COOK. If oven power level is set to 0%,
oven does not heat for programmed time.
If no power level is displayed, the
microwave is operating at 100% power.
7