Table of Contents
Advertisement
key until the Preset Channel number to be deleted is displayed, then release the
PRESET key.
4.14.2 Operation
Pressing the PRESET key toggles between Preset Channel A, b, C, d, E, and regular
channel. Preset Channel A is represented by "A" to the left of the channel number on the
LCD, and channel B is represented by "b" ....... Do not confuse this "A" with the one that
sometimes is displayed to the right of the channel number (described in the section 3.2 of
this Owner's Manual).
4.15 SIMPLEX/DUPLEX CHANNEL USE
All channels are factory-programmed in accordance with FCC (USA), Industry Canada and
International regulations. Mode of operation cannot be altered from simplex to duplex or
vice-versa. Simplex or duplex mode is automatically activated, depending on the channel
and whether USA, International or Canadian operating mode is selected. Refer to the
channel charts in the OWNER'S MANUAL SUPPLEMENT.
4.16 SET MODE
The HX370S's Set Mode system allows a number of transceiver operating parameters to be
custom-configured for your operating requirements.
The Set Mode is easy to activated and set, using the following procedure:
1.
Turn the radio off.
2.
Hold down the SQ switch and then turn on the transceiver.
3.
The "SET" will appear on the display, indicate that activate the Set Mode.
4.
Press the SQ switch to select the Menu item to be adjusted.
5.
Press the [UP] or [DOWN] key select the status or value of the Menu item. Then press
SQ switch to save the new setting.
6.
After completing your adjustment, press the PTT switch to save the new setting and exit
to normal operation.
4.16.1 bEP (Key Beep)
Function: Enable/disable Keypad beeper.
Available Values: ON/OFF
Default: ON
4.16.2 CHF (Channel Frequency Display)
Function: Select the frequency of each channel.
Available Values: ON/OFF
Default: OFF
4.16.3 CHn (Channel Name)
Function: Input channel name of each channel.
Available Values: Alphanumeric
Default:
4.16.4 dUL (Dual Watch)
Function: Select the Dual Watch channel.
Available Values: SPL/NOR
Default: SPL
4.16.5 LP (Lamp Mode)
Function: Select the LCD/Keypad Lamp mode.
Available Values: KEY/CNT (Continuous)/OFF
9/14
FCC ID: K6630083220
IC ID: 511B-30083220
Operating Manual
Vertex Standard Co., Ltd.
Advertisement
Table of Contents
