Zio Ciro Subito Cotto 45 Instructions

It is important that the Subito Cotto oven is installed and used
only in accordance with this user manual for your safety and
to ensure that it functions correctly.
It is advisable to read the following instructions carefully
before using the oven.
Make sure you know how to operate. The safety instructions
do not completely eliminate the danger, and adequate
accident prevention measures must always be used.
PLACE OF USE AND SUPPORTING BASE OF THE OVEN
The Subito Cotto 45 oven is designed for outdoor use, and it is recommended to use it in a place
where there is no wind. Subito Cotto 45 is made with materials resistant to atmospheric agents,
however it is recommended to cover it when not in use.
• Position the oven on a surface suitable for supporting the weight.
• Place the oven in a place away from any combustible material.
Subito Cotto 45 is configured as standard for use with LPG gas. Upon request before purchase,
there is the possibility of configuring the product for Natural Gas.
It is necessary to use a 1.5 meter ½ inch (12mm) hose and a low pressure regulator in order to
connect Subito Cotto 45 to the LPG cylinder.
This regulator must have the following characteristics:
• Flow rate: 4 kg/h
• LOW Pressure: 30 mbar
Connect the gas pipe by screwing the nut into the coupling behind the oven.
N.B. The piezoelectric of the Burner needs an AA battery in order to work.
Subito Cotto 45
Instructions - English
BURNER AND GAS CONNECTION
Use a suitable gasket with standard pipe.
TECHNICAL CHARACTERISTICS OF THE BURNER
Thermal Potential > MIN 2KW – MAX 6KW
GAS Pressure > Da 2,5 a 50 mbar
GAS Attack > ½ Pollice (12mm)
Weight oft he burner > 1,7 Kg