Display Functions - Miele HG07-W Operating Instructions Manual

Guide to the appliance

Display functions

The display is used to select or set the
following:
- the program
- any Options
- the Timer
- the Settings
The display can show the following:
- the program name
- the program stage
- The estimated time left for the pro-
gram to run
- Any relevant fault messages and in-
formation
To save energy, the dishwasher turns
off after a few minutes if you do not
press any sensor buttons during this
time.
Touch the  sensor button to turn the
dishwasher back on.
18
The sensor button on the control field
and in the display react to fingertip con-
tact.
The touch display can be scratched
by pointed or sharp objects, e.g.,
pens.
Only touch the display with your fin-
gers.
Touch the required menu option to se-
lect it.
The currently selected setting is marked
in orange and can be changed.
The OK sensor button in the display is
used to confirm a message or setting
and to move to another menu level.
To exit a sub-menu again, use the Back
sensor button.
Touch the  sensor button at any time
to return to the Programs menu.
If you do not press any sensor buttons
for several seconds, the display will re-
vert to the previous menu. You will then
have to enter your settings again.