Cleaning The Spray Arms - Miele HG07-W Operating Instructions Manual

Cleaning the spray arms

Particles of food can get stuck in the
spray-arm jets and bearings. The spray
arms should therefore be inspected reg-
ularly (approx. every 2–4 months).
Never run a wash program without
using the spray arms.

Damage due to soiling entering
the circulation system.
Without filters, soiling can enter the
circulation system and cause a
blockage.
Do not run a wash program without
the lower spray arm or without the fil-
ters.
When cleaning the filters and spray
arms, make sure that coarse soiling
cannot get into the circulation sys-
tem.
 Turn off the dishwasher.
Cleaning and care
Removing the cutlery tray (if present)
In order to be able to remove the upper
spray arm, you first have to remove the
cutlery tray (if present).
 Pull out the cutlery tray.
 Press the rail safety clips on both
sides of the cutlery tray together 
and remove the safety clips .
 Take out the cutlery tray completely.
91