Klarstein Alpbach Manual page 29

• Press the + (E) or - (F) button to adjust the temperature.
• As soon as the temperature you set is higher than the actual room temperature, the
heating process starts.
• If the room temperature is higher than the temperature you set, heating will not start.
Low heating power
Press the MENU button (D) twice. L" is displayed on the screen and the heating symbol
flashes.
To set the temperature, first press the OK button. The factory set temperature is 10 °C
(50 °F) and is displayed on the screen as follows:
• Press the + (E) or - (F) button to adjust the temperature.
• As soon as the temperature you set is higher than the actual room temperature, the
heating process starts.
• If the room temperature is higher than the temperature you set, heating will not start.
Setting the Temperature Display
• The factory-set temperature display is Celsius.
• Press and hold the MENU button for three seconds, then press the + (E) or - (F)
buttons to change the temperature display from Celsius to Fahrenheit.
EN
29