Using Your Dehumidifier - Zanussi ZDH1802 Quick Start Quide

USING YOUR DEHUMIDIFIER

When the dehumidifier reaches its pre-set level, the fan motor will
continue running and the compressor will stop working
When the water tank is full or removed the unit will automatically
shut off. Both the fan motor and compressor will stop immediately.
After the unit has stopped, the unit cannot be restarted for 3 minutes.
This is a safety feature to protect the appliance. If the unit is not
turned off then unit will automatically start after 3 minutes.
The unit has frost protection, this means that when frost builds up
inside the unit the compressor with turn off and the fan will continue
to run to remove the frost. Once the frost is removed the compressor
If power to the unit is broken unexpectedly (power cut), once power is
restored the unit will restart on the function it was running prior to
Turning the Unit On
•
Remove all packaging and plug the unit into a socket.
•
Ensure the water tank is correctly positioned, the drain hole is clear
in water tank area if you are using the tank to collect the water.
•
Press the Power button to turn the dehumidifier on and off. The
power indicator light will illuminate when the unit is turned on.
•
When the unit is first switched on, continuous extraction mode (at
maximum extraction rate) and high fan speed will be will be
selected.
will operate again.
the power being broken.
Page 9