Zanussi ZDH1802 Quick Start Quide page 12

USING YOUR DEHUMIDIFIER
Note: The humidity cannot be set when the unit is operating in
Continuous Dehumidifier (Extraction) Mode
Note: The timer function cannot be set when the unit is operating in
Continuous Dehumidifier (Extraction) Mode.
Note: The fan speed can be set when the unit is operating in Continuous
Dehumidifier (Extraction) Mode.
Setting the Timer
Delayed Start
•
The unit must be switched OFF for the Auto Start function to be
programmed.
•
With the unit switched off, press the Timer button and the 2h indicator
will light up. Press again to select another time, after 5 seconds if the
timer button is not pressed then the timer will activate.
•
The delayed start time can be off, 2 hours, 4 hours or 8 hours.
•
The selected time indicator light will stay illuminated. The countdown
to the start time will start.
Auto Stop
•
The Auto Stop function can only be set when the unit is ON.
•
With the power on, press the Timer button and the 2h indicator will
light up. Press again to select another time, after 5 seconds if the timer
button is not pressed then the timer will activate.
•
The stop time can be off, 2 hours, 4 hours or 8 hours.
•
The selected time indicator light will stay illuminated. The countdown
to the stop time will start.
Note: Turning the unit On or Off at any time will cancel the Delayed Start
or Auto Stop functions and the unit can take 2 minutes to restart.
If the time is adjusted to "off" this will also cancel the Timer function.
If the water drawer is full, the Delayed Start and Auto Stop functions will
be cancelled.
Page 12