Zanussi ZDH1802 Quick Start Quide page 10

USING YOUR DEHUMIDIFIER
Setting the Humidity
•
For drier air, select a lower humidity percent value(%)
•
For damper air, select a higher percent value(%).
Note: The humidity level cannot be set when the unit is operating in
Turbo Mode, Dryer Mode or Continuous Dehumidifier (Extraction)
Mode.
Dehumidify Mode
•
Press the Mode button on the control panel until the Dehumidify
indicator light is illuminated.
•
In the Dehumidify mode the humidity level can be selected; 40%,
50%, 60% and 70%. Press the Humidity level button to select the
humidity level you require, if after 5 seconds if the humidity button
is not pressed then the humidity level will activate.
•
Press the Power button or Mode button to cancel the Dehumidify
mode.
Note: The fan speed can be set when the unit is operating in
Dehumidify Mode.
Note: The timer function can be set when the unit is operating in
Dehumidify Mode.
Turbo Mode
•
Press the Mode button on the control panel until the Turbo
indicator light is illuminated.
•
In the Turbo dehumidifying mode, the fan is automatically set to
high speed and the humidity level is automatically set at 30% (all
humidity indicators are off).
•
Press the Power button or Mode button to cancel the Turbo Mode.
Note: The humidity and fan speed cannot be set when the unit is
operating in Turbo Mode.
Page 10