Advertisement
Spacious Recess, 2-parts
(please retain and file together with the purchase receipt)
Dear Customer,
Thank you for purchasing this product. We would like to ask you to observe the following notes and tips so you
can enjoy this product for a long time.
Checking the product:
Check the shower enclosure prior to installation. Lay out the parts and check that all component parts are present
and whether any damages may have occurred during transportation. No claim for defective glass or other
damages will be accepted after the product has been installed.
Important: The toughened safety glass used may show characteristic features due to its manufacturing process
(EN 12150). So-called hair scratches can occur on the glass panel's surface up to a length of 150 mm, as well
as blisters up to a diameter of 0.75 mm. In either case there are no reasons for complaints. In case you still see
reasons for a complaint, please consider the accepted inspection distance that is 1.5 metres under normal lighting
conditions. The same applies to the surface of the powder-coated profiles. The overall impression is determining.
Likewise please take into account that we use different, high quality materials when manufacturing the shower
enclosures, which in exceptional cases can lead to slight colour differences, though, these do not justify a complaint.
Installation / sealing / leak proof:
It is imperative to carry out the installation according to the instructions too ensure full product funktionality. Please
read the installation instructions carefully prior to installation. Cover up the work area with blankets in order to
avoid any damages to the shower tray or to the tiles. Important information to ensure a leak tight finish:
Please ensure that you seal horizontal joints only from the outside.
TIP: The horizontal joints of shower enclosures are to be sealed only from the outside, so that the water in the
profiles can easily run back to the showering area.
Please seal the perpendicular joints on the outside continuosly from top to bottom. In the event of a recurring
leak please make sure that you
A full waterproof and leak tight fit is not achievable with frameless shower enclosures due to their construction.
Warranty:
The warranty covers fabrication defects and material defects, except for damages occurred during transportation,
faulty orders, damages caused during installation, inappropriate handling and cleaning, damages caused by the
use of cosmetics, colouring liquids and food, colour deviation, impairment of surface due to fabrication, wear and
tear parts (rollers, sliding parts, hinges, silicone and magnetic parts, etc.). The manufacturer reserves the right to
repair or replace.
Cleaning/
maintenance:
We recommend airing your bathroom after showering and cleaning the shower enclosure regularly. For cleaning
we recommend normal liquid detergents for the bathroom or washing-up liquid as well as water. Please do not
use cleaning powder or solvents. Clean with a soft piece of cloth or a sponge.
Cleaning agents with a pH value of less than 3 or more than 10 can cause damages on profiles, hinges, handles
and treated glass surfaces. These should not be used for cleaning. Damages to surfaces and material caused by
inappropriate handling and cleaning are not covered by the warranty.
Silicone sealing materials create a chemical compound with cleaning agents, air and water. Sometimes it is
inevitable that this chemical compounds create mildew. According to the chemical industry silicone sealing
materials are not resistant to mildew.
Important: Mildew does not justify the exchange of products or re-imbursement of the purchase price as it is
caused by inappropriate cleaning. From time to time it will be necessary to treat moving parts (such as hinges,
rollers etc.) with Vaseline. Take the opportunity to re-adjust and tighten any screws etc.
Treated glass surfaces:
Glass products that have been manufactured with a specific glass surface treatment need special cleaning and
maintenance.
1. Regular cleaning after showering - cleaning with a squeegee
2. Washing with water or cleaning agents without acetic acetate
TIP: You can find out about the glass treatment by making the water test. Put some water on the inside and the
outside of the shower enclosure´s glass and observe the dripping off (lotus effect).
Spare parts:
Any missing components, those damaged during transportation, or parts worn out over time can be ordered via
the service department. Important: Please place the order in writing using our attached spare parts list together
with the proof of purchase and warranty pass.
Contact:
Spare parts ordering UK: Fax 01889 565 853 or German Fax 0049 29 62 / 9 72-42 60
E-mail:
hskcs@aol.com
The parts ordered will be sent dirctly to you. Any parts ordered as matter of wear and tear will be charged for.
You acknowledge your consent with your signature.
Once again, thank you for purchasing this product .
If you have any improvements or suggestions then please feel free to write to us.
2
Warranty Pass
have f
ollowed the instructions exactly.
or
ersatzteile@duschservice.de
414120/414140
414160/414180
D80310-D80314
Made in Germany
804-2
Advertisement
