Adding New User Keys; Deleting Enrolled Keys - MTI CX FLEX 4A Product Manual

ADDING NEW USER KEYS

1
From an armed state, place the User Key over the RFID
icon to disarm the system. LED will be flashing white.

DELETING ENROLLED KEYS

1
From an Armed state, place the
User Key over the RFID icon to
disarm the system. LED will be
flashing white.
www.mtigs.com | T:800.426.6844
2 Place Authorization Card over the RFID icon. Follow Key
Enrollment process starting on page 4.
(This deletes all User Keys from the system.)
2
Hold down the Authorization
Card for 5 seconds, LED will be
solid yellow and a 10 second
countdown timer will start beeping.
CX FLEX™ 4A PRODUCT MANUAL
3
Place the Authorization Card over
the RFID icon AGAIN while LED is
yellow, before the countdown timer
ends.
If successful  unit beeps 2 times
and the LED will turn solid green
If unsuccessful  unit beeps 4
times (wrong Authorization Card)
MTI P/N 063-00318 rev A ©2019 MTI All Rights Reserved
6