Quick Start Guide; Top Panel - GigRig G3 ATOM User Manual

THE ADVANCED SWITCHING SYSTEM

2. QUICK START GUIDE

We want you to jump right in, so here is what you need to know to get started.
2.1. BACK PANEL CONNECTIONS

2.2. TOP PANEL

2.3. CONNECTIONS
To connect your effects to the back panel of G3:
1. Connect G3 Atom FX Loop SEND to FX Pedal Input.
2. Connect FX Pedal OUTPUT to G3 Atom Loop Return.
3. Connect your amp(s). PLEASE NOTE, if you are only using one amplifier/DAW you MUST use OUT1 as
this is your earth/ground. Connect to your second amplifier or channel/DAW using OUT2, as this is
isolated and phase reversible.
4. Connect your tuner to the TUNER/AUX Output.
5. Connect any MIDI enabled pedals using the MIDI INPUT/OUTPUT.
6. Connect your Remote Switch controllable devices (i.e. Amp channel, Remote Loopy 2, Tap Tempo) using
G3 Atom's REMOTE SWITCH sockets.
7. Connect your power to G3 Atom. We strongly recommend using TheGigRig Generator, supplied with
your G3 Atom.
THE GIGRIG G3 ATOM USER MANUAL
5