CyberPower B100WRC1 User Manual

1-Outlet Surge Protector 1-Outlet Surge Protector
B100WRC1 B100WRC1
USER MANUAL
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry
locations and only indoors. DO NOT plug into another relocatable
power tap. DO NOT "daisy chain" surge protectors. DO NOT use
with any aquarium equipment. DO NOT use if properly grounded
outlets are not available. DO NOT install this device if there is less
than 10 meters (30 feet) or more of wire between the electrical
outlet and electrical service panel. DO NOT use for medical or life
support equipment.
This device features an internal protection that will disconnect
the surge protective component at the end of its useful life, but it
will maintain unprotected power to the load.
TROUBLESHOOTING
If the protected indicator does not light, the surge protector's AC
lines are no longer protected from surge. The surge protector
may have received a power surge or spike beyond its specified
limits that overloaded the protection circuitry and rendered it
inactive. The surge protector has protected your connected
equipment as designed, but it will not protect against future
surges and spikes. It should be replaced.
TECHNICAL SUPPORT
Please contact our Tech Support Department with installation,
troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation: Monday – Friday 7:00am – 6:00pm CST
Copyright © 2018 Cyber Power Systems (USA), Inc. All rights reserved.
1
2
2
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower B100WRC1 Surge Protector.
This manual explains the features and operation of the B100WRC1.
Please take a few moments to read this manual.
FEATURES
1. Standard Outlet
2. Surge Protected Indicator
Illuminated when the surge protection feature is working properly.
SPECIFICATIONS
• Model Number: B100WRC1
• Outlets: 1 Standard Outlet
• Surge Protection: 1500 Joules
• Electrical Rating: 125 V/15 A/1875 W
• UL Clamping Voltage: UL 1449 3rd/800 V (H-N, H-G, N-G)
• Maximum Peak Current: 45,000 A
• 3 AC Lines Protected: H-N: 15,000 A, H-G: 15,000 A, N-G: 15,000 A
• Response Time: Less than 1 nanosecond
• Attenuation: Up to 32 dB
• EMI/RFI Filtration: 150 kHz to 100 MHz
LIMITED LIFETIME WARRANTY AND CONNECTED
EQUIPMENT GUARANTEE
Read the following terms and conditions carefully before using the
CyberPower B100WRC1 (the "product"). By using the product, you
consent to be bound by the terms and conditions of this limited
lifetime warranty and connected equipment guarantee (together
referred to as this "warranty"). IF YOU DO NOT AGREE TO THE
TERMS AND CONDITIONS OF THIS WARRANTY, YOU SHOULD
RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT.
Who is providing this Warranty, and what does it cover?
Cyber Power Systems (USA), Inc. ("CyberPower") provides this
Limited Lifetime Warranty. It only covers the original purchaser
and ends if you no longer own the product. This warranty covers
defects in materials and workmanship in the product under normal
use and conditions. It also covers equipment connected to the
product and damaged because of the failure of the product. This
warranty covers the product and connected equipment for as
long as you own the product.
How do you open a connected equipment claim?
1. Call us at (877) 297-6937, or write to us at Cyber Power Systems
(USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379, or
send us an email at claims@cpsww.com within 10 days of the
occurrence for instructions.
2. When you contact CyberPower, identify the product, the
purchase date, and the item(s) of connected equipment. Have
information on all applicable insurance or other resources of
recovery/payment that are available to the initial customer, and
request a claim number.
3. You must provide a dated purchase receipt (or other proof of
the original purchase) for the CyberPower unit and connected
equipment. You also need to provide a description of the
damage to your connected equipment.
1
3