User's Manual
3.6.2.1 Connectivity Configuration
Item
Options
Description
This option configures Connectivity. [Auto
Detection] means that if Discrete solution is
discovered it will be enabled by default. Otherwise
Disable Integrated
CNVi Mode
Integrated solution (CNVi) will be enabled; [Disable
Auto Detection[Default]
Integrated] disables Integrated Solution. NOTE:
When CNVi is present, the GPIO pins that are used
for radio.
Disabled[Default]
Seriallo UART0 needs to be enabled to select BT
Discrete Bluetooth Module
Thunder Peak
Module.
ECM-WHL User's Manual 37