Installation Considerations - Wolf DD30I Installation Manual

Installation Considerations

Before You Start
• Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the Wolf warranty. Refer to the down-
draft ventilation use & care guide for warranty details,
or visit our website, wolfappliance.com.
• Check with local utilities for electrical codes that apply
in your area. Local codes vary. Installation, electrical
connections and grounding must comply with applica-
ble codes. In the absence of local codes, this appli-
ance should be installed in accordance with National
Electrical Code ANSI/NFPA 70-1990 or latest edition.
• This appliance must be properly grounded. Refer to
electrical requirements on page 8.
• Make sure you have the tools and materials necessary
for proper installation.
• Any required service must be performed by a Wolf
authorized service center.
Installation Considerations
Wolf downdraft systems can be used with all Wolf induc-
tion, electric and gas cooktops, except unframed models.
Wolf downdraft systems cannot be used with the steamer
or fryer module and are not recommended for use with the
electric grill module. A downdraft can also be used with
sealed burner rangetop models SRT304 and SRT366.
An accessory trim kit is necessary for this installation.
Contact your authorized Wolf dealer for details.
Wolf downdraft ventilation systems can be mounted in an
island, peninsula or standard wall location.
Wolf downdraft model DD30 will fit most 30" (762) wide
cabinets, model DD36 will fit most 36" (914) wide cabinets
and model DD45 will fit most 45
It is recommended that oversized cabinets be used for
easier installation. The cabinet back may need to be
removed.
1
/ " (1156) wide cabinets.
2
4