Editing An Instrument's Sound (Inst Edit) - Roland TR-6S Owner's Manual

Editing an Instrument's Sound
Selecting an Instrument' s Tone
Instrument's tones of the currently selected kit are selected
individually.
1
[INST]
Press the button.
The [INST] button and the [BD]–[OH] button (that had been
selected for [TR-REC]) are lit, and the INST screen appears.
2
Use the [VALUE] knob to select the instrument's
tone.
MEMO
5 To switch categories, hold down the [SHIFT] button and turn
the [VALUE] knob.
5 By holding down the [VALUE] knob and turning the [VALUE]
knob, you can move through the instrument tones in steps
of 10.
5 When you press the [VALUE] knob, the category name is
enclosed by "[ ], " and you can switch between instrument
tones with the category locked (category lock). When you
press the [VALUE] knob once again, category lock is cleared.
You can specify category lock for each instrument, and that
setting is saved in the kit.
3
Press the [INST] button once again.
The [INST] button goes dark, and you exit the INST screen.
1
Hold down the [SHIFT]
button.
The INST Edit screen appears.
2
Select a parameter.
2-1
Use the [VALUE] knob to select a parameter.
2-2
Press the [VALUE] knob.
3
Modify values.
3-1
Use the [VALUE] knob to edit the value.
3-2
Press the [VALUE] knob.
Return to the parameter selection (step 2).
4
[INST]
Press the button.
Exit the INST Edit screen.
MEMO
For details on the INST parameters, refer to "Parameter Guide
(English)" (PDF).
(INST)
Category
button and press the [INST]
(INST Edit)
About the icons shown in the INST screen
Preset: Tones originally in the TR-6S
Sample: Tones that use samples
Loop: Tones that play repeatedly
User: Tones that use imported samples
FM: Tones that use the FM tone generator
Searching for instrument tones
1
Hold down the [KIT] button and press the
button.
2
Use the [VALUE] knob to select the tone type
(ACB, FM), and then press the
3
[VALUE]
Use the knob to select the instrument's
tone.
[INST]
[VALUE] knob.
25