Inspection; Handling - S&C PureWave SMS-250 Installation Manual

Shipping and Handling

Inspection

Examine the shipment for external evidence of damage as
soon after receipt as possible, preferably before removal
from the carrier's conveyance. Check the bill of lading to
make sure all shipping skids and containers listed thereon
are present.
If there is visible loss and/or damage:
1. Notify the delivering carrier immediately.
2. Ask for a carrier inspection.
3. Note the condition of shipment on all copies of the
delivery receipt.
4. File a claim with the carrier.
If concealed damaged is discovered:
1. Notify the delivering carrier within 15 days of receipt
of shipment.
2. Ask for a carrier inspection.
3. File a claim with the carrier.
Also notify S&C Electric Company in all instances of
loss and/or damage.

Handling

NOTICE
The PCS enclosure shall be lifted according to lifting draw-
ing PEA-1610-4-IN and any other project-specific lifting
drawings supplied with the PureWave SMS-250 . Lifting
equipment such as spreader bars and hoist sling straps
are provided by others .
To avoid damaging the PCS enclosure when placing it at
the desired location, observe normal recommended proce-
dures as well as the following general instructions.
CAUTION
The PCS installer must ensure ALL lifting equipment,
beams, slings, chains, spreader bars, and apparatus are
properly rated for the identified load . Failure to do so can
result in equipment damage and personal injury .
NOTICE
Before to lifting the PCS enclosure, ensure that all doors
are closed and locked . The doors contribute to the structural
integrity of the system and, if left opened, increase the risk
of damage to the enclosure during lifting .
WARNING
When handling the PCS enclosure with an overhead hoist,
observe standard lifting practices as well as the following
general instructions . Failure to follow these procedures can
result in serious personal injury and equipment damage .
8 S&C Instruction Sheet 659-525