Midea MISSION2 3D INVERTER Series Service Manual page 59

MOD01-23HFN1-MT0W
Procedure
1) Turn off the air conditioner and the
power breaker.
2) Remove the screws of the big handle
and then remove the big handle
(2 screws) (see CJ_D01_INV_001).
3) Remove the screws of the top cover
and then remove the top cover (4
screws). Two of the screws is located
underneath the big handle (see CJ_
D01_INV_002).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
CJ_D01_INV_001
CJ_D01_INV_002
 Page 55 