Download Print this page

Siemens CSAPELTU Installation Instructions page 3

Communication adapter

Advertisement

Hazardous Voltage.
Hazardous Voltage.
Will cause death or serious injury.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
turned on.
turned on.
4
The first screen displayed will be the Comm Port configuration. Select the Comm Port the
Communications Adapter is connected too. The default Baud Rate for the trip unit is 9600.
Select the "OK" button to continue.
If the COM port selected is not available, an error window will be displayed.
Select a different Comm Port using the pull down menu.
5
The Main Data screen will be displayed. If the trip unit is communicating
the dot on the bottom right will be green and show "Communications
OK". If the dot is red and shows "No Communications", verify the cables
are connected properly. If there is still no communications then the Serial
Port on your computer may not support the Communications Adapter.
This can be corrected by adding (2) CR2025 coin cell batteries (Not
Included) to the Communications Adapter:
a. Turn the circuit breaker to the OFF position.
b. Disconnect the 2 cables from the Communications Adapter.
c. Add (2) CR2025 coin cell batteries to the Communications Adapter as
shown in steps 6-8.
d. Re-connect the Communications Adapter by starting over at step 2.
6
Tensión peligrosa.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
energizar el interruptor.
7
" Batteries not included."
2 batteries -
# CR2025
OR # CR2032
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
Couper l'alimentation de l'appareil et barrer avant de
travailler.
travailler.
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
l'approvisionnement de pouvoir soit alimenté.
3 / 4
8
2.7 lb. in.
[ 0.3 Nm ]

Advertisement

loading

This manual is also suitable for:

3vl9000-8am01