Setting Analog Mode (Hd Radio Mode Only); Manual Storing Of Station Presets; Automatic Memory Of Station Presets; Tuning To Preset Stations - Alpine IVA-W200 Owner's Manual

4
Touch [TUNE] to choose the tuning mode.
Each touch changes the tuning mode display.
Distance Local
• There are two modes you can select for auto tuning, DX and
Local:
- DX (Distance) mode (with DX SEEK indicator ON);
Both strong and weak stations will be tuned in.
- Local mode (with SEEK indicator ON);
Only strong stations will be tuned in.
The initial setting is DX.
5
Touch [ ], [ ] or [
radio frequency up or down respectively.
In manual mode, touch and hold to change the frequency
continuously.
• "DIGITAL" is displayed when a digital radio station is received.
Setting Analog Mode (HD Radio mode
only)
While receiving HD radio, you can switch to analog signal mode, even
in areas that receive digital radio station signals.
1
Touch [ANALOG] in HD Radio Tuner mode.
Switches to analog mode, and the [ANALOG] button turns
orange.
Touch [ANALOG] again to cancel analog mode.

Manual Storing of Station Presets

1
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
2
Touch [P1/2] to change the function guide.
3
Touch and hold any one of the preset buttons
[P.SET 1] through [P.SET 6] for at least 2 seconds.
The selected station is stored.
4
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
band desired and repeat the procedure.
A total of 18 stations can be stored in the preset memory (6
stations for each band; FM1, FM2 or AM).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorized.
Manual Distance
], [ ] to change the

Automatic Memory of Station Presets

The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
After selecting the desired band, touch [A.MEMO].
The tuner automatically seeks and stores 6 strong stations into
[P.SET 1] to [P.SET 6] in order of signal strength.
When the automatic storing has been completed, the tuner goes
to the station stored in [P.SET 1].
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.

Tuning to Preset Stations

You can tune in the preset stations in memory on each band using the
preset number.
1
After selecting the desired band, touch [P1/2] to
change the function guide.
2
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] that has a station stored to it.
The preset station is received.
Changing the Display (HD Radio mode
only)
Text information, such as Station name, Song title, Artist, etc., is
displayed while receiving a digital radio station.
1
Touch [INFO.] on the HD Radio Tuner mode main
screen.
Each time you touch this button, the display changes as
shown below.
1
Short Station Name *
2
Song title *
2
Artist *
2
Album *
1
* Displays Short Station Name / Long Station Name in the Station
Information Service Data.
2
* Displays Song title / Artist / Album in the main program Service
Data.
1
Long Station Name *
13
-EN